|
|
|
|
|
|
Rebound
boards for internal use
Rebound boards can
be used to create divisions or pitch areas within a larger area. They
are ideal for dividing sports halls in half (often with a dividing curtain),
creating and. Rebound
boards are installed in sports halls to segregate playing areas and are
often fitted along the same line as a dividing curtain. Rebound boards
are used as a dividing wall between different games eg five-a-side football,
hockey, basketball courts or badminton and can be used to segregate areas
for CV or resistance equipment,
making a safe walkway
and for enclosing storage areas along the sides of sports halls, or to
create areas within areas
eg five a side areas.
Our rebound board systems
feature
- Standard rebound board panels
with or without kick plates
- Gate sections to allow access
- Inline posts, corner posts,
3 way posts and 4 way posts to create any layout required
- Standard and special sockets
to fit to almost any floor
|
|
|
|
Storage
Rebound boards include a wheel
each end for transporting without lifting but are usually store in a wall
mounted rack or on a special storage trolley.
- Storage trolleys are available
and will take up to 15 boards and posts - just wheel it to the side
of each panel as you take them off to minimise lifting and wheeling
- Alternatively a storage
rack is a space efficient solution for storing boards and is ideal for
fitting to the wall of a store room. The panels can then be removed
and wheeled in and slotted into the storage rack which will hold up
to 10 standard rebound boards and posts.
|
|
|
|
Freestanding
rebound boards
Free standing pitch
dividers are made with a sturdy rigid aluminium framework. Each unit is
made up of durable and rot free interlocking plastic boards and these
fit together with a male/female joining system. These do not require the
installation of any floor sockets eg where underfloor heating makes the
installation of sockets impractical. These can be made up as standard
size panels, gates and smaller infill panels.
Size 1.22m long x 1.22m high x 620mm deep
|
|
Contact us for a quotation, or for further information:
Tel: 01295 760192 Fax: 01295 768092
e-mail: sales@olympicgymnasium.com
|
|
|
|
OG Technical
- Rebound boards
- each board is 2.4m long
x 1.2m high x 32mm thick (2.44m x 1.22m panels are also available)
- each panel section with
the 2 100mm steel end plates is 2500mm long and with posts will take
up 2550mm centre to centre
- 150mm steel kick plates
can be fitted to the bottom edge of panels - useful where hard balls
are being used - such as in hockey - or where very heavy use is to be
expected kick plates can be fitted on both sides
- standard colours are
blue or green - a colour chart showing alternatives is available on
request
- each board is fitted
with wheels to enable quick transport and handles are provided which
fit into the ends of the boards to assist manoeuvring - end plates on
each board have a locating hole for inserting a carrying handle and
rebound
boards are easily removed from the posts by two people using the lifting
handles, one each end, and wheeled away (each end plate has a small
wheel at the bottom) to a storage area or put on a storage trolley
- gate sections are either
960mm or 1360mm wide - these can
be installed wherever you need an opening for transporting equipment
or as a through way. Gates can be made in non standard sizes to suit
particular requirements and all long gate sections have a wheel at the
outer end to support the section
- panels locate on 40mm
square steel posts at each end which fit into sockets inserted into
the floor - by using corner posts, "T" joint posts and four
way posts almost any combination of gates and boards can be assembled
to create the playing areas most suitable for the hall eg the rebates
for the five a side goals
- sockets are installed
at 2550mm centres
- floor sockets are required
for each post and must be installed in the floor by a specialist. These
include caps so that when the socket is not in use and the post removed
the cap can be fitted to leave a flush playing surface. The standard
depth is 150mm but special lengths can be made for floors with large
voids beneath
- for five a side rebates
we recommend a minimum of 5.1m width to allow for the thickness of the
goal steel
- storage trolleys can
carry both boards and posts but we strongly recommend the use of racks
- weights are
- standard board 55kg
- standard gate 25kg
- light-weight board
35kg
- light-weight gate
20kg
- post 8kg
|
|
